Aqua Lung Micra ADJ Manuel du propriétaire télécharger pdf (Page 25)

Regulator Owner’s Manual 25

a. The preferred method is to attach the regulator to a charged SCUBA

cylinder, open the cylinder valve to pressurize the regulator, and

thoroughly soak both the first and second-stages. Pressurizing the

regulator will effectively prevent the entrance of moisture and/or

contaminants into the regulator while it soaks.

b. If it is not feasible to soak the regulator while it is attached to a

cylinder, it may be soaked unpressurized - provided that the dust cap

is securely sealed over the inlet with its O-ring intact, and the second

stage purges buttons are not depressed while the regulator is sub-

merged or wet.

NOTE: When soaking or rinsing an adjustable model regulator

unpressurized, check to ensure that the second stage adjustment knob

(VAK) is turned completely “in” (clockwise) to prevent moisture from

entering the valve and LP hose.

CAUTION: DO NOT depress the purge button, loosen the first stage

yoke screw, or turn the second stage adjustment knob all the way “out”

(adjustable models) if the regulator is submerged unpressurized. Doing

so will allow the entrance of moisture, and will require that the regulator

be returned to an Authorized Aqua Lung Dealer for service.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

Pas de commentaire

Aqua Lung Micra ADJ Manuel du propriétaire Page 25